Specifications
| Item | Description |
|---|---|
| Sensor applied voltage | DC10V,2.5V±10% Output current: within 120mA (30mA when using DC power supply option) |
| Sensor input range | -3.0 ~ +3.0 mV/V |
| Equivalent input and TEDS |
Calibration range: 0.3 ~ 3.0mV/V Calibration accuracy: within 0.1%FS at setting range more than 0.5mV/V. |
| Zero Adj. range | 0 ~ ±2.0mV/V |
| Ｍinimum input sensitivity | 1μV/count Resolution: 1/10000 at input 1mV/V or more. |
| Accuracy | Non-linearity: within 0.02%FS at input 3mV/V Zero drift: within 0.5μV/℃ RTI Gain drift: within 0.01%/℃ |
| A/D converter | Speed: 100 times/sec |
| Analog filter | 4/10/100(default)/3kHz Selectable on the front panel |
| TEDS fubction | IEEE1451.4 Class2 Mix Mode Interface |
| Peak hold function (Analog and Digital Methods) |
Response speed: Approx. 1kHz (wave width 2ms: input 3mV/V ,analog filter: 3kHz) Accuracy: within 0.2%FS Reset time: 50μs |
| Display | Character hieght: 16mm 7segments Red LED, 5 digits numeric display Display range: ±19999 Decimal point: selectable Display rate: 3/6/13/25 times/sec, selectable |
| Display items | Status(LED): HI,OK,LOW,PEAK,HOLD,CALIBRATION LOCK,SETTING LOCK |
| Setup items | CAL setup: Zero CAL/Span CAL (Equivalent Input CAL, Real Load CAL, TEDS CAL) Function setup: High Limit, Low Limit, High/Low Limit Comp. Mode, Hysteresis, Zero Vicinity, Digital Filter, Analog Filter, Motion Detect, Zero Tracking, Digital Zero, Zero Offset, Hold Mode, Key Lock, Minimum Scale, Display rate, Excitation Voltage, B.C.D. Refresh Rate, RS-232C, D/A Converter |
| External signal | High/Low Limit Relay Contact Output, Analog Voltage Output, Hold Signal Input, Digital Zero Signal Input |
| Power supply | AC85 ~ 264V 50/60 Hz, Approx.7W DC10~28V(option), Approx.9W |
| Ambient condition | Operation Temp.: -10 ~ +40℃ Strage Temp.: -40 ~ +80℃ Humidity: 80% RH or lower (no condensation) |
| External dimension | 96 (W) x 96 (H) x 146 (D) mm(not including protruding parts) Panel cut dimension 92 x 92 (+1-0)mm |
| Weight | Approx. 1kg |
| Options |
DS-7000-OP3: B.C.D. Parallel Data Output DS-7000-OP4: RS-232C Interface DS-7000-OP7: D/A Converter (Voltage and Current Output) *Refer to the instruction manual for the details |
| Accessories | Operation Manual *1 Ac cable *1 B.C.D. Output Connector Plug 57-30360 DDK *1 (when an order for B.C.D. option is placed) Ferrite Core *1 (when an order for B.C.D. option or D/A option is placed) |
